contestada

Your wireless network consists of multiple 802.11n access points that are configured as follows:- SSID (hidden): CorpNet- Security: WPA2-PSK using AES- Frequency: 5.75 GHz- Bandwidth per channel: 40 MHzBecause of the unique construction of your organization's facility, there are many locations that do not have a clear line of sight between network clients and access points. As a result, radio signals are reflected along multiple paths before finally being received. The result is distorted signals that interfere with each other.What should you do?- Install directional access points.- Switch to RADIUS authentication for wireless clients.- Implement antenna diversity.- Reduce the power of the access point radio signals.

Respuesta :

namrata421

The solution is to increase the channel bandwidth allotted to 40 MHz.

The best method to accomplish this would be to increase the bandwidth allotted to each channel to 40 MHz. By doing this, it will be ensured that the capacity is adequate. This is merely due to the fact that a channel's bandwidth indicates how much data can flow through it at any given moment; the larger the channel, the more data may flow through it simultaneously. Therefore, doubling this bandwidth channel size would be more than enough for the network to handle all of the data provided 20 MHz is sufficient for the network.

To know more about bandwidth visit:-

https://brainly.com/question/28436786

#SPJ4

Otras preguntas